FRONTICS always makes an effort to offer
better product and better service for customer.
The specimen can be placed on the Micro Positioning System for convenient operation, and sufficient space is secured
under the base to facilitate change of specimen. And also, it allows you to move precisely not only uniaxial but also double
axis(X-Y), unlike other existing uniaxial testing unit, AIS3000 main unit which does not have horizontal movement section only
can be attached to precise stage of X-Y.
RS-MPS (Residual Stress Micro Positioning System) V2.0, an attachment to AIS3000 allows you to test specimens in various size and shape. This attachment is used for testing the specimen in the laboratories. To make easy to change specimen, Z axis movement function is included, and it also allows the equipment to move on X-Y axis.
Flat Magnetic System is necessary to obtain more stable and reliable data from the AIS System in the industry. This attachment is designed for the AIS System especially suitable for the metallic structures with flat bottom surface. It is useful when the Micro-Positioning System is not available in the laboratory or tests the small sized specimen as needed.
Double Curvature Magnetic System is an appropriate attachment for large scale pipeline facility structures, and it can be installed to any structures as long as it is magnet-attachable structure. It is developed in two kinds, following to external diameter of the most commonly used pipe in industry, they are 10~20inch and 20~48inch.
Weight Lightening Chain System is the attachment used to tighten the AIS system onto the various pipelines
ranging between 6 inch and 24 inch applied in work sites.
U Block System is the attachment applicable to a specimen ganging between 3 inch and 6 inch instead of large industrial pipelines in work sites. The binding power is an absolute for this attachment.
V-block System is designed to be used for less than 3 inch sized tube or bar-type specimen. The minimum size is 3/4inch and it can be attached immediately on-site.
We, Frontics, Inc will design and make customized jig to obtain reliable data when above mentioned attachments are unable to use depend on the location of install and/or shape of the specimen. firstname.lastname@example.org
Irregular cross section
Opened cross section
Regular cross section
Irregular cross section (Non Ferrous Series)
Fillet weld line
Installment on curved-duct